121 Product Name Use Shipment Unit AV Cement No.88 (Size of 150 mm or less) AV Cement No.62 (Size of 200 mm or more) Connects PVC pipe with FRP removed and fitting. 250 g/can 500 g/can 1 kg (No.62) Welding rod (φ3, φ4) Welds the small end of bonded pipe fitting. 1 kg/box Primer (UA solution, UB solution) Enhances the bonding of PVC and FRP. 500 g/can Q Coat Putty Fills a level difference between pipe and fitting and enhances the strength of connected/welded part. 1kg/can Polyester resin Impregnates resin to glass fibers when laminating them on the top layer of connected pipe fitting. 500 g/can Hardener Hardens Q Coat Putty and polyester resin. 500 g/can Glass fibers SU type Glass Cloth (GC) Laminates on the top layer of connected pipe/fitting for reinforcement. (Type of glass fibers differs by size.) m/lap Surface Cloth (SC) GU Type Glass Cloth (GC) Mat (M) Roving Cloth (WR) Surface Cloth (SC) Accelerator (Required when installing at overseas.) Accelerates hardening. 1kg/can Acetone Cleans the connection part. 500 g/can Maintenance materials above are required for AV pipe field installation. Maintenance materials are for AV pipe only. Do not use them for other purposes. For required quantity of maintenance materials, please consult our nearest office. 1) Precautions for storage Be cautious in storage as maintenance materials contain hazardous materials. Display of the hazardous materials and avoid flammables. 2) Precautions for handling �@ Never mix hardener and accelerator directly as it could cause an explosive reaction and create an extremely dangerous condition. �A Never put polyester resin, accelerator, hardener, primer, Q Coat Putty, acetone and adhesive close to fire as they are flammable. �B Wear protection gloves, protection glasses and organic gas mask when working. �C Do not apply an excessive impact to hardener. �D After using maintenance materials, put a lid and store in a hazardous material storage place. �E For used containers, punch a hole at the bottom of the container and dispose according to the local disposal standard. �F If maintenance materials catch a fire, distinguish by using powder and carbon dioxide fire extinguisher. �G If polyester resin, accelerator, hardener, primer, acetone or adhesive leaks, absorb it using an absorber and wipe off with a cloth immediately. �H When handling maintenance materials excluding welding rod, never touch or pull with bear hands. �I If toxic conditions caused by maintenance materials are seen, lay in a breezy area with the head lower than the legs and consult a doctor immediately. �J In case of contacting with the eyes by mistake, rinse the eyes with clean water immediately for more than 30 minutes and consult a doctor immediately. Precautions for Storing and Handling of Maintenance Materials Maintenance Materials for AV Pipe Installation Maintenance Material