129 �B Elastic Slide Pipe Size L1 L2 　R1 R2 R3 (Min.) Weight (kg/set) Sleeve Pipe Inner Pipe x Outer Pipe Sleeve Pipe Transparent PVC 16× 65 100 1000 210 35 630 200 2.4 ○ 20× 65 100 1000 210 35 630 200 2.4 ○ 25× 75 100 1200 220 40 800 200 2.7 ○ 40× 75 100 1200 220 40 800 200 2.7 ○ 50×100 125 1300 230 50 800 200 4.5 ○ 65×125 150 1300 250 65 820 200 6.7 ○ 75×150 200 1400 280 80 850 200 12.2 ○ 100×200 250 1500 300 110 900 200 19.1 . 125×250 300 1700 320 130 940 200 29.7 . 150×250 300 1700 320 130 940 200 29.7 . Notes: 1. When the outer pipe is transparent PVC, �@ Insertion Pipe VU, �B VU Increaser and �C UV Cap are not transparent. 2. O-ring is EPDM. Parts �@ Insertion Pipe VU �A Sleeve Pipe VU �B VU Cap �C VU Increaser �D O-Ring Movement image of elastic slide pipe The insertion pipe moves inside the sleeve pipe of the elastic slide pipe in conjunction with expansion/contraction of the outer pipe. Outer pipe is expanded (insertion pipe went forward). Precautions for Installation of Elastic Slide Pipe ・ Take the product out from package immediately before installation. ・ Avoid attachment of foreign objects of sand and chips, etc. to insertion pipe and sleeve pipe. ・ Silicon grease is already applied on O-ring of insertion pipe. If it is difficult to insert into sleeve pipe when adjusting the position of insertion pipe, spray water into sleeve pipe with a spray gun or apply AV lubricant (separately sold). Never use a solvent-base grease. ・ If position will be adjusted by inserting into sleeve pipe after connecting insertion pipe, avoid pulling the connection part forcibly. Outer pipe is contracted (insertion pipe went backward). L2 L1 ■ Dimensions Table (Unit: mm) Appearance image when the outer pipe is transparent PVC. * �A Sleeve pipe and �C VU increaser are connected on site. * Elastic slide pipe does not have inner pipe and outer pipe.