【DO!BOOK・ページリンク】
av-en-pipe   158 / 199

BOOKをみる

10秒後にBOOKのページに移動します


156 PP Pipe & Fittings DIN Socket PP DIN Spigot PP JIS Socket U-PVC C-PVC JIS Socket U-PVC C-PVC DIN Socket-JIS Socket (PP) (U-PVC、C-PVC) (PP) (U-PVC、C-PVC) DIN Spigot-JIS Socket φd1 φd2 φD .1 .2 φd3 z L Taper 1/T φd3 .1 .2 t d φD L Taper 1/T 2 3 4 1 2 3 4 1 DIN Socket-JIS Socket (PP) (U-PVC、C-PVC) (PP) (U-PVC、C-PVC) DIN Spigot-JIS Socket φd1 φd2 φD .1 .2 φd3 z L Taper 1/T φd3 .1 .2 t d φD L Taper 1/T 2 3 4 1 2 3 4 1 @ Material of body and cap nut: For U-PVC (Unit: MPa) Size Working Temperature (Max.: 50「ェC) 0「ェC 20「ェC 40「ェC 50「ェC 16(d20) 1.0 1.0 0.8 0.7 20(d25) 1.0 1.0 0.8 0.7 25(d32) 1.0 1.0 0.8 0.7 30(d40) 1.0 1.0 0.8 0.7 40(d50) 1.0 1.0 0.8 0.7 50(d63) 1.0 1.0 0.8 0.7 @ Material of body and cap nut: For C-PVC (Unit: MPa) Size Working Temperature (Max.: 90「ェC) 0「ェC 20「ェC 40「ェC 60「ェC 80「ェC 90「ェC 16(d20) 1.0 1.0 0.8 0.6 0.3 0.2 20(d25) 1.0 1.0 0.8 0.6 0.3 0.2 25(d32) 1.0 1.0 0.8 0.6 0.3 0.2 30(d40) 1.0 1.0 0.8 0.6 0.3 0.2 40(d50) 1.0 1.0 0.8 0.6 0.3 0.2 50(d63) 1.0 1.0 0.8 0.6 0.3 0.2 Size DIN Socket DIN Spigot JIS Socket d mm inch d1 d2 R1 L z d t R1 L d3 R2 1/T 20 16 1/2 19.3 19.5 14.5 41.5 7 20 2.5 18.5 54 22.11 20 1/34 25 20 3/4 24.3 24.5 16 53 13 25 2.7 22 68.5 26.13 24 1/34 32 25 1 31.3 31.5 18 59 14 32 3.0 22.5 74.5 32.16 27 1/34 40 30 11/4 39.2 39.45 20.5 65.5 15 40 3.7 26 83 38.19 30 1/34 50 40 11/2 49.2 49.45 23.5 74.5 14 50 4.6 32 97 48.21 37 1/37 63 50 2 62.1 62.5 27.5 92 22.5 63 5.8 36 108.5 60.25 42 1/37 Maximum Working Pressure by Temperature PRODUCT MODEL CODE LIST Prefab Joint (Spigot) PRODUCT MODEL CODE PP EPDM . JPF P E F I Size PP FKM . JPF P V J I Size PP EPDM Lubricant Free . JPF 4 E F I Size PP FKM Lubricant Free . JPF 4 V F I Size t φD1 φD2 L z R1 R2 z Size Product Display D1 D2 t R1 R2 Z L Weight (kg) 15 d20 20 47 1.9 38 26 53 106 0.053 20 d25 25 57 2.3 39 25 55 110 0.082 25 d32 32 64 3.0 42 25 59 118 0.112 32 d40 40 78 3.7 42 25 62 124 0.187 40 d50 50 89 4.6 45 25 65 130 0.259 50 d63 63 109 5.8 45 25 68 136 0.427 Notes: Material of O-ring is normally EPDM but also available with FKM. ■ Dimensions Table (Unit: mm) 1. Values in the table are water maximum working pressure and are not applicable for chemical solutions other than water. 2. Values in the table are calculated based on the service life of 10 years and the safety factor of 2. 3. Maximum working pressure is the pressure including the water hammer pressure. Do not use them exceeding the maximum working pressure. * * Material Type * Rubber * Connection *** Size E EPDM V FKM * Standard D DIN I ISO T Socket F Spigot P PP U PP *U-PVC C PP *C-PVC 4 Lubricant Free D PP Socket E PP Spigot 016 16o . 050 50o JPF Type JPF Prefab Joint ■ Dimensions Table Parts Table No. Description Pcs. Material @ Body 1 U-PVC、C-PVC A End Connector 1 PP B Union Nut 1 U-PVC、C-PVC C O-Ring 1 EPDM, FKM Prefab Joint Features Use them for connecting PVC pipe (U-PVC, C-PVC) and PP pipe.