014 Tap Water Unplasticized Polyvinyl Chloride Pipe | Water Services PVC Pipe Agricultural Water Service Wall-Thickness Unplasticized Polyvinyl Chloride Pipe | Agricultural Water Service Wall-Thickness PVC Pipe Size Outer Diameter Thickness Overall Length Reference Weight per 1m (kg/m) Basic Dimension Max/Min. Tolerance Average Tolerance Basic Dimension Tolerance VPW HIVPW 13 18.0 ±0.2 ±0.2 2.5 ±0.2 4000 一0.174 0.170 16 22.0 ±0.2 ±0.2 3.0 ±0.3 4000 一0.256 0.251 20 26.0 ±0.2 ±0.2 3.0 ±0.3 4000 一0.310 0.303 25 32.0 ±0.2 ±0.2 3.5 ±0.3 4000 一0.448 0.439 30 38.0 ±0.3 ±0.2 3.5 ±0.3 4000 一0.542 0.531 40 48.0 ±0.3 ±0.2 4.0 ±0.3 4000 5000 0.791 0.774 50 60.0 ±0.4 ±0.2 4.5 ±0.4 4000 5000 1.122 1.098 ● 65 76.0 ±0.5 ±0.2 4.5 ±0.4 4000 5000 1.445 1.415 75 89.0 ±0.5 ±0.2 5.9 ±0.4 4000 5000 2.202 2.156 100 114.0 ±0.6 ±0.2 7.1 ±0.5 4000 5000 3.409 3.338 ●125 140.0 ±0.8 ±0.3 7.5 ±0.5 4000 5000 4.464 4.370 150 165.0 ±1.0 ±0.3 9.6 ±0.6 4000 5000 6.701 6.561 ■ Dimensions Table (Unit: mm) P Z 15° X t φD φd1 呼び径 挿口及び直管部 外径 D X 50 75 100 150 mm 8 11 13 18 内径 d1 受口深さ P Z 全長 L 受口部 寸法表単位 :mm 基本寸法平均許容差 面取り幅 基本寸法平均許容差最大 最小 許容差基本寸法許容差 有効長 許容差 60.0 89.0 114.0 165.0 60.9 90.2 115.3 166.6 110 120 130 145 5000 5000 5000 5000 5118 5131 5143 5163 +- 30 10 10 30 - + 10 30 - + 10 30 - + 許容差 最大 最小 ±1.0 ±0.6 ±0.5 ±0.4 ±0.2 ±0.2 ±0.2 ±0.3 厚さ t 4.1 5.5 6.6 8.9 ±0.9 ±1.2 ±1.2 ±1.4 ±0.6 ±0.7 ±0.7 ±0.8 ±5 ±5 ±5 ±5 (kg/本) 35.2 17.9 11.5 5.8 125 140.0 ±0.8 ±0.3 7.0 14 141.4 ±1.4 ±0.8 135 ±5 5000 5149 - 10 ● + 30 23.5 1.●印は塩化ビニル管・継手協会規格JPPFA AS31規格品です。 L （最小） 注記 2.最大最小外径の許容差とは、任意断面における外径測定値の最大値又は最小値と基本 3.平均外径の許容差とは、任意断面における円周を円周率3.142で除した値又は相互 寸法との差をいう。 に等間隔な2方向の外径測定値の算術平均値と基本寸法との差をいう。 S 5 13 5 S 107 120 132 138 152 標線 参考重量 VP HIVP 5.7 11.3 17.5 23.0 34.5 Size Port and Straight Part Socket Part Effective Length Overall Length Reference Weight (kg/piece) Outer Diameter D Thickness t Chamfer Width Gauge Line Inner Diameter d1 Socket Depth P Z L Tolerance VP HIVP Basic Dimension Max/Min. Tolerance Average Tolerance (Min.) X S Basic Dimension Max/Min. Tolerance Average Tolerance Basic Dimension Tolerance 50 60.0 ±0.4 ±0.2 4.1 8 107 60.9 ±0.9 ±0.6 110 ±5 5000 5118 ＋30 .10 5.8 5.7 75 89.0 ±0.5 ±0.2 5.5 11 120 90.2 ±1.2 ±0.7 120 ±5 5000 5131 ＋30 .10 11.5 11.3 100 114.0 ±0.6 ±0.2 6.6 13 132 115.3 ±1.2 ±0.7 130 ±5 5000 5143 ＋30 .10 17.9 17.5 ●125 140.0 ±0.8 ±0.3 7.0 14 138 141.4 1.4 ±0.8 135 ±5 5000 5149 ＋30 .10 23.5 23.0 150 165.0 ±1.0 ±0.3 9.0 18 152 166.6 ±1.4 ±0.8 145 ±5 5000 5163 ＋30 .10 35.2 34.5 ■ Dimensions Table (Unit: mm) Maximum Working Pressure (Hydrostatic pressure) VPW 0.75MPa HIVPW t 4000・5000±10 φD φd Maximum Working Pressure (Hydrostatic pressure) VPW 0.75MPa HIVPW Notes: Maximum/minimum outer dimensional tolerance is the difference between measured maximum and minimum values (maximum/minimum outer diameter) of any sectional outer diameter and the basic dimension. 2. Average outer dimensional tolerance is the difference between the average (average outer diameter) of measured values of outer diameters in 2 directions with an equal distance and the basic dimension. 3. The mass per 1m shown as reference is calculated using the pipe dimension as the basic dimension and setting the density of material for the pipe as 1.43g/cm3 for unplasticized polyvinyl chloride pipe and 1.40g/cm3 for impact-resistant unplasticized polyvinyl chloride pipe. It is not part of the standard. 4. Length tolerance shall be +30 -10 mm. 5. ● conform to the JPPFA standard (JPPFA AS20). Notes: 1. ● conform to the JPPFA standard (JPPFA AS33 standard). 2. Maximum/minimum outer dimensional tolerance is the difference between measured maximum or minimum outer diameter of any section and the basic dimension. 3. Average outer dimensional tolerance is the difference between the circumference of any section divided by the circumference ratio (3.142) or the arithmetic mean value of measured outer diameters in 2 directions with an equal distance to each other and the basic dimension. VPW U-PVC HIVPW HI-PVC VPW U-PVC HIVPW HI-PVC Straight Pipe PRODUCT MODEL CODE VP . P N U WP J N Size Length Abbreviation： VPW HIVPW Tap Water Unplasticized Polyvinyl Chloride Pipe (JIS K 6742) HIVPW . P N I WP J N Size Length Tap Water Rubber Ring Socket Single-Side Straight Pipe (RR Pipe) PRODUCT MODEL CODE VPW . P N U W7 J N Size Length Abbreviation： VPW HIVPW Tap Water Rubber Ring Impact-Resistant Unplasticized Polyvinyl Chloride Pipe (JWWA K 129) HIVPW . P N I W7 J N Size Length