019 Size 13 − 50 mm Size 65 − 150 mm H H φD1 H1 t H H φD1 H1 t φD φD Size 65 − 150 mm R1 H1 H φD W t H H φD1 H1 t φD φD1 φD2 R2 Size 65 − 150 mm R1 H1 H φD W t H H φD1 H1 t φD φD1 φD2 R2 Size TS HITS D t D1 D2 R1 R2 W H H1 Female Thread Size 13 □ □ 24.0 3.0 30 34 17 14 4 38 29 Rp1/2 16 □ □ 29.0 3.5 30 34 17 14 4 43 32 Rp1/2 20 □ □ 33.0 3.5 37 42 19 16 4 51 36 Rp3/4 25 □ □ 40.0 4.0 46 52 21 18 5 59 40 Rp1 ■ Dimensions Table (Unit: mm) Notes: 1. H and H1 tolerance shall be +5 -1 mm. 2. ● conform to the JPPFA standard. 3. ▲ are stock products. (PVC (30×13) are our products.) 4. ○ are accordance with JIS K6743. Size TS HITS D t H D1 H1 16×13 ○ ○ 29.0 3.5 41 24.0 38 20×13 ○ ○ 33.0 3.5 46 24.0 40 20×16 ○ ○ 33.0 3.5 48 29.0 45 25×13 ○ ○ 40.0 4.0 51 24.0 43 25×16 ○ ○ 40.0 4.0 53 29.0 48 25×20 ○ ○ 40.0 4.0 55 33.0 53 　▲ 30×13 ○ ○ 46.0 4.0 55 24.0 46 30×16 ○ ○ 46.0 4.0 57 29.0 51 30×20 ○ ○ 46.0 4.0 59 33.0 56 30×25 ○ ○ 46.0 4.0 62 40.0 61 ■ Dimensions Table (Unit: mm) Size TS HITS D t H D1 H1 40×13 ○ ○ 57.0 4.5 66 24.0 52 ▲ 40×16 ○ ○ 57.0 4.5 68 29.0 57 40×20 ○ ○ 57.0 4.5 70 33.0 62 40×25 ○ ○ 57.0 4.5 73 40.0 67 40×30 ○ ○ 57.0 4.5 76 46.0 71 50×13 ○ ○ 70.0 5.0 74 24.0 58 50×16 ○ ○ 70.0 5.0 76 29.0 63 50×20 ○ ○ 70.0 5.0 78 33.0 68 50×25 ○ ○ 70.0 5.0 81 40.0 73 50×30 ○ ○ 70.0 5.0 84 46.0 77 50×40 ○ ○ 70.0 5.0 90 57.0 88 Size TS HITS D t H D1 H1 65× 40 ● ● 87.0 6.6 100 57.0 95 65× 50 ● ● 87.0 6.6 101 70.0 104 75× 25 ○ ○ 102.0 8.0 93 40.0 88 75× 40 ○ ○ 102.0 8.0 100 57.0 102 75× 50 ○ ○ 102.0 8.0 105 70.0 110 ▲ 75× 65 ● ● 102.0 8.0 113 87.0 117 Size TS HITS D t H D1 H1 100× 50 ○ ○ 130.0 10.0 125 70.0 122 100× 75 ○ ○ 130.0 10.0 140 102.0 132 125× 75 ● ● 157.0 11.0 160 102.0 147 125×100 ● ● 157.0 11.0 173 130.0 167 150× 75 ○ ○ 186.0 13.0 195 102.0 158 150×100 ○ ○ 186.0 13.0 208 130.0 182 150×125 ● ● 186.0 13.0 217 157.0 201 Notes: 1. Threaded end shall be parallel female thread of JIS B 0203 (taper threaded end for pipes). 2. H tolerance shall be +5 -1 mm. 3. H1 tolerance shall be +5 -2 mm. 4. □ conform to the AV standard. 5. R2 tolerance shall be ±1 mm. * Use both seal tape and gasket for connection of threaded ends. * Do not use them for connecting steel pipe and PVC pipe. * Fix the area around an elbow using a retainer. Maximum Working Pressure (Hydrostatic pressure) TS・HITS 0.75MPa Maximum Working Pressure (Hydrostatic pressure) TS・HITS 0.75MPa TS U-PVC HITS HI-PVC TS U-PVC HITS HI-PVC Reducing Tee PRODUCT MODEL CODE TS . T N U TE J N Size Abbreviation： T Unplasticized Polyvinyl Chloride Pipe Fitting (JIS K6743) HITS . T N I TE J N Size Faucet Elbow PRODUCT MODEL CODE TS . T N U FL J N Size Abbreviation： FL Unplasticized Polyvinyl Chloride Pipe Fitting (JIS K6743) HITS . T N I FL J N Size