043 VU Fitting D Type N Field U Material ＊＊ Model U Standard ＊＊＊ Size DL VU-DL 90° Elbow 4L VU-45L 45° Elbow DS VU-DS Socket IN VU-IN Increaser DT VU-DT 90°Y LL VU-LL 90° Large-Bend Elbow 4Y VU-Y 45°Y LT VU-LT 90° Large-Bend Y N Others D VU Fitting Ｎ None Color U U-PVC Ｕ ＶＵ N Normal Color 040 40�o . 150 150 �o 050040 50×40 �o . 150125 150×125 �o PRODUCT MODEL CODE LIST VU Fitting Socket Common Dimensions This is used for non-pressurized piping such as drainage and sewer piping. R d1 d2 t d D ■ Dimensions Table (Unit: mm) Size d1 d2 R d t D Basic Dimension Tolerance Basic Dimension Tolerance Basic Dimension Tolerance Min Dimension Min Dimension Reference Dimension 40 48.3 ±0.3 47.8 ±0.3 22 ±1 44 2.0 54 50 60.5 ±0.3 59.5 ±0.3 25 ±3 56 2.2 67 65 76.6 ±0.3 75.4 ±0.3 35 ±3 71 2.5 83 75 89.6 ±0.3 88.3 ±0.3 40 ±5 83 3.0 97 100 114.8 ±0.4 113.2 ±0.4 50 ±5 107 3.5 124 125 140.9 ±0.4 139.1 ±0.4 65 ±5 131 4.5 151 150 166.1 ±0.5 163.9 ±0.5 80 ±5 154 5.5 178 Notes: 1. d1 and d2 shall be the average of measured inner diameters of 2 directions or more perpendicular to each other. 90° Elbow PRODUCT MODEL CODE VU-DL . D N U DL U N Size Abbreviation： VU-DL （JPPFA AS38） 45° Elbow PRODUCT MODEL CODE VU-45L . D N U 4L U N Size Abbreviation： VU-45L （JPPFA AS38） Size Z L □ 40 27 49 ● 50 33 58 ● 65 42 77 ● 75 48 88 Size Z L ● 100 62 112 □ 125 75 140 ● 150 88 168 Notes: 1. Z tolerance shall be ±2 mm. 2. L is the normal dimension. 3. ● conform to the JPPFA standard. 4. □ conform to the AV standard. ■ Dimensions Table (Unit: mm) Size Z L □ 40 14 36 ● 50 18 43 ● 65 22 57 ● 75 25 65 Size Z L ● 100 30 80 □ 125 38 103 ● 150 44 124 Notes: 1. Z tolerance shall be ±2 mm. 2. L is the normal dimension. 3. ● conform to the JPPFA standard. 4. □ conform to the AV standard. ■ Dimensions Table (Unit: mm) L L Z Z U-PVC U-PVC L L Z Z 45°