045 Reducing 90°Y PRODUCT MODEL CODE VU-DT . D N U DT U N Size Abbreviation： VU-DT （JPPFA AS38） 90° Large-Bend Elbow PRODUCT MODEL CODE VU-LL . D N U LL U N Size Abbreviation： VU-LL （JPPFA AS38） 45°Ｙ PRODUCT MODEL CODE VU-Y . D N U 4Y U N Size Abbreviation： VU-Y （JPPFA AS38） L3 L1 L2 Z3 Z1 Z2 L Z L Z L1 L2 Z2 Z3 L3 Z1 45° Size Z1 Z2 Z3 L1 L2 L3 ● 50 20 72 78 45 97 103 ● 75 26 106 115 66 146 155 ● 100 32 134 144 82 184 194 Size Z1 Z2 Z3 L1 L2 L3 □ 125 38 172 175 103 237 240 ● 150 44 204 210 124 284 290 ■ Dimensions Table (Unit: mm) Notes: 1. Tolerance of Z1, Z2 and Z3 shall be ±2 mm for the size of 100 or less and ±3 mm for the size of 150. 2. ● conform to the JPPFA standard. 3. □ conform to the AV standard. Size Z L ● 50 66 91 ● 75 100 140 ● 100 128 178 Size Z L ● 125 140 205 ● 150 170 250 ■ Dimensions Table (Unit: mm) Notes: 1. Z tolerance shall be ±2 mm for the size of 100 or less and ±3 mm for the size of 125 or more. 2. ● conform to the JPPFA standard. Size Z1 Z2 Z3 L1 L2 L3 ● 75× 50 34 35 48 74 75 73 □ 75× 65 42 43 48 82 83 83 Size Z1 Z2 Z3 L1 L2 L3 ● 100× 50 34 35 62 84 85 87 ● 100× 75 48 49 62 98 99 102 □ 150×100 62 63 88 142 143 138 ■ Dimensions Table (Unit: mm) Notes: 1. Tolerance of Z1, Z2 and Z3 shall be ±2 mm. 2. An arrow to show direction of flow shall be embossed on the outside as shown in the diagram. 3. ● conform to the JPPFA standard. 4. □ conform to the AV standard. U-PVC U-PVC U-PVC