111 COMPATIBLE ACTUATOR AUTOMATIC CONTROL VALVE CONTROL VALVE . OUR ORIGINAL SPECIAL PLUG SHAPE REDUCES EFFECTS OF FLUID VISCOSITY AND ALLOWS FOR HIGHLY ACCURATE FLOW CONTROL (IDEAL FOR CORROSIVE FLUID). . USE OF HIGH-PERFORMANCE ALL ELECTRONIC SERVO ACTUATOR (ELECTRICALLY DRIVEN) . EMBEDDED WITH ELECTRONIC LIMITER AND OVERLOAD PROTECTION CIRCUIT FOR ALL CYCLE TIME. AUTOMATIC PNEUMATIC TYPE AV For detailed specifications, see P.120 ELECTRIC TYPE M For detailed specifications, see P.129 U U-PVC F PVDF E EPDM F ViflonRF FKM-F C ViflonRC FKM-C PNEUMATIC F DOUBLE ACTING G AIR TO OPEN ELECTRIC 1 Single-Phase 100V 2 Single-Phase 200V D DC24V PNEUMATIC V TYPE AV ELECTRIC M TYPE M A ACTUATION CV TYPE ＊ ACTUATOR TYPE ＊ ACTION / POWER SOURCE ＊ BODY MATERIAL ＊ SEAL MATERIAL F CONNECTION ＊＊＊ SIZE PNEUMATIC 01 E/P POSITIONER 02 P/P POSITIONER 03 E/P FR SET 04 P/P FR SET * Specify only in the case of pneumatic type. ＊＊ POSITIONER 015 15mm . 100 100mm BASIC SPECIFICATIONS VALVE TYPE―――――――――――――――――――――――――――――――――――――――――――――――――――――――――CONTROL VALVE SIZE―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――15 mm−100 mm (1/2 inch−4 inch) BODY MATERIAL―――――――――――――――――――――――――――――――――― U-PVC PVDF SEAL MATERIAL / SEAT―――――――――――― EPDM ViflonRF FKM-F ViflonR-C FKM-C etc. CONNECTION / FLANGED――――――――――――――――JIS10K, DIN, ANSI HIGH PURITY SERIES―――――――――――――――――――――――――――LUBRICANT FREE FLUID TEMPERATURE MAXIMUM WORKING PRESSURE (NORMAL TEMPERATURE) MPa{kgf/cm2} CONNECTION METHOD 15mm 25mm 50mm 80mm 100mm FLANGED U-PVC 0℃ 〜 50℃ 1.0｛10.2｝ 0.75｛7.7｝ ○ PVDF 0℃ 〜 90℃ 1.0｛10.2｝ . ○ NOTE The maximum working pressure is the value including the water hammer pressure. Be careful that the maximum working pressure is not exceeded during use. * Concerning the allowable pressure for each temperature and material, see the technical documents at the end of this catalog. A AUTOMATIC VALVE CV CV F FLANGED 1 JIS10K D DIN A ANSI ＊ STANDARD AUTOMATIC PRODUCT MODEL CODE LIST NOTE DIN standard type is U-PVC 15 and 25 mm only. ANSI standard type is U-PVC 15, 25 and 50 mm only. 1 HIGH PURITY SERIES 1 LUBRICANT FREE