169 BASIC SPECIFICATIONS VALVE TYPE――――――――――――――― SEDIMENT STRAINER (TYPE Y) SIZE―――――――――――――――――――――― 15 mm−100 mm (1/2 inch−4 inch) BODY MATERIAL―――――――――― U-PVC SEAL MATERIAL――――――――――― EPDM FKM etc. CONNECTION / FLANGED―――― JIS5K, JIS10K, DIN, ANSI 　　　　　 SOCKET―――― JIS, DIN, ANSI 　　　　　 THREADED――― Rc, Rp, NPT FLUID TEMPERATURE MAXIMUM WORKING PRESSURE (NORMAL TEMPERATURE) MPa{kgf/cm2} CONNECTION METHOD 15mm―50mm 65mm―100mm FLANGED SOCKET THREADED U-PVC 0℃ 〜 50℃ 1.0｛10.2｝ 0.6｛6.1｝ ○ ○ ○ NOTE For information on chemical resistance, contact our sales office. SEDIMENT STRAINER (TYPE Y) . MATERIAL WITH HIGH RESISTANCE TO CORROSION, CHEMICALS AND WEAR. . TRANSPARENT BODY THAT ALLOWS FOR CHECKING OF INSIDE FLOW. . EASY SCREEN CLEANING, DISASSEMBLY/ASSEMBLY FOR REPLACEMENT AND MAINTENANCE. MANUAL Flow direction Flow direction Flow direction FLANGED SOCKET THREADED 6 2 3 9 7 1 5 8 10 4 4 4 NOTES ● Avoid direct sunlight and store it indoors. Also avoid storing the valve in a place that may be exposed to high temperatures. ● Pay attention to the direction of flow when mounting the product on a pipe. (It is indicated by an arrow on the valve parts.) ● Clean the screen periodically. (Handle the screen with utmost care during cleaning.) ● Make sure during piping work that the valve is not exposed to direct sunlight. ● Note that volatile liquids, such as hydrogen peroxide solution (H2O2) and sodium hypochlorite (NaCIO), may cause abnormal pressure increase in strainer. (When the internal pressure abnormally increases due to vaporization, the gas becomes compressive fluid. If the valve breaks in this state, it will be very dangerous, causing explosion and scattering of fragments.) ● The Y-shaped strainer, in particular, has such a structure that the corners are susceptible to the effects of repeated stress due to internal variations. Therefore, for lines where pulsation (including air hammer and water hammer) may occur, take adequate measures during piping installation. Otherwise breakage may occur. Also, perform periodic check (approx. once a year). ● Piping lines made of copper require particular attention because the effects of stress such as internal fluctuations are concentrated on the Y-shaped strainer. OTHERS / SEDIMENT STRAINER (TYPE Y) PART NO. / NAME QTY MATERIAL 1 BODY 1 U-PVC (transparent) 2 SCREEN (1) 1 U-PVC 3 SCREEN SUPPORT 1 U-PVC 4 END CONNECTOR 2 U-PVC 5 UNION NUT 3 U-PVC PART NO. / NAME QTY MATERIAL 6 RETAINING RING 1 U-PVC 7 SPLIT RING 1 U-PVC 8 O-RING (A) 2 EPDM, FKM, etc. 9 O-RING (B) 1 10 STOP RING (2) 2 PVDF PARTS LIST MANUAL NOTES (1) 40 mesh : standard 30/20/60 mesh: custom-build *60 mesh: U-PVC (20 mesh) + PVDC (60 mesh)　*For Stainless Steel mesh, consult us. (2) Flanged type only. V ACTUATION YS TYPE ＊＊ MESH TYPE U BODY MATERIAL ＊ SEAL MATERIAL ＊ CONNECTION ＊ STANDARD ＊＊＊ SIZE E EPDM V FKM S SOCKET N THREADED F FLANGED J JIS 1 JIS10K 5 JIS 5K V MANUAL VALVE U U-PVC 015 15mm . 100 100mm 2U 20MESH 3U 30MESH 4U 40MESH MANUAL PRODUCT MODEL CODE LIST YS SEDIMENT STRAINER (TYPE Y)