171 PARTS LIST MANUAL (Bottom) (Top) 32 mm . 150 mm (1. inch . 6 inch) 200 mm . 350 mm (8 inch . 14 inch) 125mm, 150mm RIGHTWARD OPENING DETAIL OF EMBEDDED BODY FITTING THREADED 19 20 19 20 18 11 14 17 9 19 16 20 15 10 8 2d 2c 1a 5 6a 6 85 4 7 3 1 18 6 16 8 2b 2c 1b 7 4 5 9 3 1 PART NO. / NAME QTY MATERIAL 6 THRUST RING(3) 1 set / 1 PP 6a THRUST BEARING(1) 1 SUJ2 7 BOLT/NUT ーSUS304 8 O-RING (B) 1 EPDM, etc. 9 O-RING (C) 2 EPDM, etc. 10 BUSH (A)(1) 1 PP 11 BUSH (B)(1) 1 PP 14 O-RING (E)(1) 1 EPDM, etc. PART NO. / NAME QTY MATERIAL 15 O-RING (F)(1) 1 EPDM, etc. 16 O-RING (D) 1 EPDM, etc. 17 SET SCREW (A)(1) 1 SUS304 18 DUST SEAL 1 EPDM 19 CAP (A) 1 FC200 (EPOXY RESIN POWDER COATING) 20 SET SCREW (B) 1 SUS304 PART NO. / NAME QTY MATERIAL 1 BODY 1 HI-PVC 1a EMBEDDED BODY FITTING (1) - C3604 1b RING (2) 1 SET STPG 2c GATE (BODY) (A) 1 PP 2d GATE (BODY) EMBEDDED FITTING (A) 1 BC6 3 STEM 1 SUS403 4 BONNET (LID) (A) 1 HI-PVC 5 BONNET (LID) (B) 1 HI-PVC NOTES (1) is used for sizes of 200 mm or more (2) is used for threaded type (epoxy paint after unichrome plating). (3) The quantity of use is 1 set (2 pieces) for 150 mm or less and 1 piece for 200 mm or more. MANUAL . FOR ALL THE WETTED PARTS, CORROSION-RESISTANT MATERIAL IS USED. . LIGHTWEIGHT AND HIGHLY IMPACT RESISTANT. . MADE OF ROBUST, LIGHTWEIGHT AND IMPACT-RESISTANT HARD VINYL CHLORIDE (HI-PVC), WITH A WEIGHT OF 1/3 TO 1/5 COMPARED TO METAL VALVES. . COMPACT DESIGN ALLOWS FOR SHALLOW DEPTH MOUNTING (SIZE: 32 - 200 mm). BASIC SPECIFICATIONS VALVE TYPE――――――――――――――― GATE VALVE STANDARD TYPE (TYPE P) 　　　　　　　　　　　　　INSIDE SCREW CAP TYPE SIZE―――――――――――――――――――――― 32 mm−350 mm (1 1/4 inch−14 inch) BODY MATERIAL―――――――――― HI-PVC SEAL MATERIAL / O RING―――― EPDM etc. CONNECTION / FLANGED―――― JIS10K, DIN, ANSI 　　　　　 THREADED――― Rc, Rp, NPT FLUID TEMPERATURE MAXIMUM WORKING PRESSURE (NORMAL TEMPERATURE) MPa{kgf/cm2} CONNECTION METHOD 32mm―200mm 250mm 300 mm・350 mm FLANGED THREADED HI-PVC -10℃ 〜 50℃ 1.0｛10.2｝ 0.75｛7.7｝ 0.5｛5.1｝ ○ ○ NOTES The maximum working pressure is the value including the water hammer pressure. Be careful that the maximum working pressure is not exceeded during use. * Concerning the allowable pressure for each temperature and material, see the technical documents at the end of this catalog. WATER/WASTEWATER- AND AGRICULTURE-RELATED / GATE VALVE STANDARD TYPE (TYPE P) INSIDE SCREW CAP TYPE GATE VALVE STANDARD TYPE (TYPE P) INSIDE SCREW CAP TYPE