175 MANUAL PARTS LIST MANUAL Cap for rightward opening 150 mm THREADED 19 4 19 7 6 9 5 32 18 16 3 2j 2c 1 20 66 8 2k 31 2b 1b WATER/WASTEWATER- AND AGRICULTURE-RELATED / GATE VALVE SOFT SEAL TYPE (TYPE S) SOFT SEAL VALVE TYPE 66 GATE VALVE SOFT SEAL TYPE (TYPE S) TYPE 66 . COMPATIBLE WITH THE JAPAN WATER WORKS ASSOCIATION STANDARD (JWWA B125 SYNTHETIC RESIN SOFT SEAL SLUICE VALVE), THE VALVE CAN BE SAFELY USED FOR WATER DISTRIBUTION/SUPPLY. (SIZE: 50 mm, 75 mm, 100 mm, 150 mm) . EQUIPPED WITH OVER-TIGHTENING PREVENTION MECHANISM TO PREVENT ACCIDENTS DUE TO EXCESSIVE TIGHTENING. . THE CHANNEL SURFACE FREE FROM IRREGULARITIES ALLOWS FOR SMOOTH FLOW. THE RUBBER SOFT SEAL ENSURES EXCELLENT WATER TIGHTNESS. . COMPACT DESIGN ALLOWS FOR SHALLOW DEPTH MOUNTING. BASIC SPECIFICATIONS VALVE TYPE――――――――――――――― GATE VALVE SOFT SEAL TYPE (TYPE S) 　　　　　　　　　　　　　SOFT SEAL VALVE TYPE 66 SIZE―――――――――――――――――――――― 32 mm−150 mm (1 1/4 inch−6 inch) BODY MATERIAL―――――――――― HI-PVC SEAL MATERIAL / SEAT―――― SBR NBR 　　　　　 O-RING―――――――― EPDM CONNECTION / FLANGED―――― JIS10K, DIN, ANSI 　　　　　 THREADED――― Rc, Rp, NPT FLUID TEMPERATURE MAXIMUM WORKING PRESSURE (NORMAL TEMPERATURE) MPa{kgf/cm2} CONNECTION METHOD FLANGED THREADED HI-PVC -10℃ 〜 50℃ 1.0｛10.2｝ ○ ○ NOTES (1) The products of a size of 40 mm are registered as valves certified by the Quality Certification Center, Japan Water Works Association. (2) The maximum working pressure is the value including the water hammer pressure. Be careful that the maximum working pressure is not exceeded during use. (3) 32 mm type is processed from 40 mm. * Concerning the allowable pressure for each temperature and material, see the technical documents at the end of this catalog. NOTES For 30 mm and 40 mm, the cap (A) is coated with epoxy powder (white). PART NO. / NAME QTY MATERIAL 1 BODY 1 HI-PVC 1b RING 1 SET STPG 2b SEAT 1 SBR, NBR 2c GATE (BODY) (A) 1 U-PVC, HI-PVC 2j INTERNAL THREAD DEFLECTOR 1 C3604 2k DEFLECTOR RETAINER 1 HI-PVC 3 STEM 1 SUS304 PART NO. / NAME QTY MATERIAL 4 BONNET (LID) (A) 1 HI-PVC 5 BONNET (LID) (B) 1 HI-PVC 6 THRUST RING 1 SET PP 7 BOLT/NUT (A) − SUS304 8 O-RING (B) 1 SBR, NBR 9 O-RING (C) 1 SBR, NBR 16 O-RING (D) 1 EPDM PART NO. / NAME QTY MATERIAL 18 DUST SEAL 1 EPDM 19 CAP (A) 1 FCD450 20 SET SCREW (B) 1 SUS304 31 STOPPER 1 SUS304 32 PIN (A) 1 SUS304 66 O-RING (H) 1 SET EPDM