177 MANUAL PARTS LIST MANUAL 65 mm, 125 mm (2. inch, 5 inch) 200 mm (8 inch) 20 125 mm RIGHTWARD OPENING 19 7 4 5 9 3 1 18 66 6 16 8 2d 19 20 20 19 11 17 16 10 2g 1a 18 14 9 15 8 2f 5 6a 6 85 4 7 3 1 2d 2e 2c 2b 2c 2b WATER/WASTEWATER- AND AGRICULTURE-RELATED / GATE VALVE SOFT SEAL TYPE (TYPE S) INSIDE SCREW CAP TYPE GATE VALVE SOFT SEAL TYPE (TYPE S) INSIDE SCREW CAP TYPE . COMPATIBLE WITH THE JAPAN WATER WORKS ASSOCIATION STANDARD (JWWA B125 SYNTHETIC RESIN SOFT SEAL SLUICE VALVE), THE VALVE CAN BE SAFELY USED FOR WATER DISTRIBUTION/SUPPLY. (SIZE: 125 mm) . THE CHANNEL SURFACE FREE FROM IRREGULARITIES ALLOWS FOR SMOOTH FLOW. THE RUBBER SOFT SEAL ENSURES EXCELLENT WATER TIGHTNESS. . COMPACT DESIGN ALLOWS FOR SHALLOW DEPTH MOUNTING. BASIC SPECIFICATIONS VALVE TYPE――――――――――――――― GATE VALVE SOFT SEAL TYPE (TYPE S) 　　　　　　　　　　　　　INSIDE SCREW CAP TYPE SIZE―――――――――――――――――――――― 65 mm, 125 mm, 200 mm 　　　　　　　　　　　　　　　 (2 1/2 inch, 5 inch, 8 inch) BODY MATERIAL―――――――――― HI-PVC SEAL MATERIAL / SEAT――――― SBR NBR 　　　　　 O-RING――― EPDM CONNECTION / FLANGED―――― JIS10K, DIN, ANSI FLUID TEMPERATURE MAXIMUM WORKING PRESSURE (NORMAL TEMPERATURE) MPa{kgf/cm2} CONNECTION METHOD FLANGED HI-PVC -10℃ 〜 50℃ 1.0｛10.2｝ ○ NOTES The maximum working pressure is the value including the water hammer pressure. Be careful that the maximum working pressure is not exceeded during use. * Concerning the allowable pressure for each temperature and material, see the technical documents at the end of this catalog. PART NO. / NAME QTY MATERIAL 1 BODY 1 HI-PVC 1a EMBEDDED BODY FITTING (1) 4 C3604 2b SEAT 1 SBR, NBR 2c GATE (BODY) (A) 1 C-PVC 2d GATE (BODY) EMBEDDED FITTING (A) 1 BC6 2e GATE (BODY) (B)(2) 1 PP 2f GATE (BODY) EMBEDDED FITTING (B) 4 C3604 2g BOLT (A) (2) 4 SUS304 3 STEM 1 SUS304 PART NO. / NAME QTY MATERIAL 4 BONNET (LID) (A) 1 HI-PVC 5 BONNET (LID) (B) 1 HI-PVC 6 THRUST RING(5) 1 set / 1 PP 6a THRUST BEARING (2) 1 SUJ2 7 BOLT/NUT ーSUS304 8 O-RING (B) 1 EPDM, SBR4), NBR 9 O-RING (C)(3) 1・2 EPDM, SBR4), NBR 14 O-RING (E)(2) 2 EPDM, SBR4), NBR 15 O-RING (F)(2) 1 EPDM, SBR4), NBR PART NO. / NAME QTY MATERIAL 16 O-RING (D) 1 EPDM, SBR4), NBR 10 BUSH (A)(2) 1 PP 11 BUSH (B)(2) 1 PP 17 SCREW 1 SUS304 18 DUST SEAL 1 EPDM 19 CAP (A) 1 FC200 (EPOXY POWDER COATING) 20 SET SCREW (B) 1 SUS304 66 O-RING (H) 2 EPDM 85 O-RING (F)(2) 1 EPDM, SBR4), NBR NOTES (1) is used only for 10K 200 mm. (2) is used only for 200 mm. (3) The quantity of use is 1 piece for 65 mm and 125 mm and 2 pieces for 200 mm. (4) Only 200 mm is available. (5) The quantity of use is 1 set (2 pieces) for 65 mm and 125 mm and 1 piece for 200 mm. * For 65 mm and 200 mm, the cap (A) is coated with epoxy powder (white).