018 DIAPHRAGM VALVE TYPE14 . LIGHTWIIGHT, COMPACT SIZE AND HIGH ANTI-CORROSION RESISTANCE DUE TO PLASTIC ACTUATOR MOUNTED. . AIR PIPING IS COMPATIBLE WITH NAMUR STANDARD. . OPTIONS ARE EASILY REMOVABLE/REPLACEABLE AND CAN BE MOUNTED LATER. (EXCEPT POSITIONER) . EQUIPPED WITH STOPPER THAT CAN BE ADJUSTED AT FULL CLOSED POSITION. . 0.6MPa OR 1.0MPa MODEL OF MAXIMUM WORKING PRESSURE AVAILABLE FOR FLUID PRESSURE CONDITION. BASIC SPECIFICATIONS VALVE TYPE―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――DIAPHRAGM VALVE TYPE14 PNEUMATIC TYPE AP SIZE―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――65mm−100mm (21/2 inch−4 inch) BODY MATERIAL―――――――――――――――――――――――――――――――――――――――――――――――――― U-PVC C-PVC PP PVDF SEAL MATERIAL / DIAPHRAGM―――――――――― EPDM PTFE FKM etc. CONNECTION / FLANGED――――――――――――――――――――――――――――――――JIS10K, DIN PN10, ANSI CLASS150 OPTION―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――PVDF CUSHION COVER MODEL, 　　　　　　　　　　　　　 ELECTROLYTIC MODEL, EL MODEL FLUID TEMPERATURE MAXIMUM WORKING PRESSURE (NORMAL TEMPERATURE) MPa{Kgf/cm2} CONNECTION METHOD FOR 1.0MPa FOR 0.6MPa FLANGED U-PVC 0℃〜60℃ 1.0｛10.2｝ 0.6｛6.1｝ ○ C-PVC 0℃〜90℃ 1.0｛10.2｝ 0.6｛6.1｝ ○ PP -20℃〜90℃ 1.0｛10.2｝ 0.6｛6.1｝ ○ PVDF -40℃〜120℃ 1.0｛10.2｝ 0.6｛6.1｝ ○ 065 65mm . 100 100mm A AUTOMATIC 14 TYPE 14 F FLANGED VALVE A ACTUATION 14 TYPE P ACTUATOR TYPE ＊ ACTION POWER SOURCE ＊ BODY MATERIAL ＊ SEAL MATERIAL F CONNECTION ＊ STANDARD ＊＊＊ SIZE U U-PVC C C-PVC P PP F PVDF 1 JIS10K D DIN A ANSI (GRINNEL STANDARD) J ANSI (AV STANDARD) E EPDM T PTFE V FKM F VIFLONRF(FKM-F） C VIFLONRC(FKM-C） PNEUMATIC F DOUBLE ACTING G AIR TO OPEN （0.6MPa） H AIR TO OPEN (1.0MPa） S AIR TO CLOSE PNEUMATIC P TYPE AP AUTOMATIC PNEUMATIC TYPE AP 逆作動 復動 正作動 DOUBLE ACTING AIR TO OPEN AIR TO CLOSE NOTE The maximum working pressure is the value including the water hammer pressure. Be careful that the maximum working pressure is not exceeded during use. * Concerning the allowable pressure for each temperature and material, see the technical documents at the end of this catalog. * The diaphragm may become loose due to temperature changes during long storage, operation stop or while in use. Check the conditions and then retighten the bolts and nuts between the bonnet and the body to the "bonnet tightening torque". (Failure to do so may cause .uid leakage.) SIZE ACTUATOR 0.6MPa 1.0MPa 65mm (2 1/2inch) AP-1DA AP-1AO-06 AP-1AO-10 AP-1AS 80mm (　　3inch) AP-2DA AP-2AO-06 − AP-2AS − − AP-2AO-10 − 100mm (　　4inch) AP-3DA AP-3AO-06 − − − − AP-3AO-10 AP-3AS AIR TO OPEN AIR TO CLOSE DOUBLE ACTING ACTUATOR SELECTION CHART ■ JIS、DIN (Unit：mm) JIS10K DIN PN10 mm D1 D2 H H1 S S1 S2 P L t L t PVC C-PVC PP PVDF PVC C-PVC PP PVDF DOUBLE ACTING AIR TO OPEN 0.6MPa AIR TO CLOSE AIR TO OPEN 1.0MPa DOUBLE ACTING AIR TO OPEN 0.6MPa AIR TO CLOSE AIR TO OPEN 1.0MPa DOUBLE ACTING AIR TO OPEN 0.6MPa AIR TO CLOSE AIR TO OPEN 1.0MPa 65 216 216 255 255 353 353 61 85 M8 15 1/4 250 22 23 290 22 22 80 216 232 255 271 376 389 63 100 M12 22 1/4 280 22 23 310 24 24 100 232 276 271 315 428 451 78 120 M12 22 1/4 340 22 24 350 24 26 ■ ANSI (Unit：inch) ANSI CLASS150 inch mm D1 D2 H H1 S S1 S2 P L t GRINNEL STANDARD AV STANDARD PVC C-PVC PP PVDF DOUBLE ACTING AIR TO OPEN 0.6MPa AIR TO CLOSE AIR TO OPEN 1.0MPa AIR TO OPEN 0.6MPa AIR TO CLOSE AIR TO OPEN 1.0MPa AIR TO OPEN 0.6MPa AIR TO CLOSE AIR TO OPEN 1.0MPa 2 1/2 65 8.50 8.50 10.04 10.04 13.90 13.90 2.40 3.35 M8 0.59 1/4 - 9.84 0.87 0.91 3 80 8.50 9.13 10.04 10.67 14.80 15.31 2.48 3.94 M12 0.87 1/4 10.37 11.02 0.87 0.91 4 100 9.13 10.87 10.67 12.40 16.85 17.76 3.07 4.72 M12 0.87 1/4 12.93 13.39 0.87 0.94 S φD2 φD1 2-S1 DEPTH S2 AIR SUPPLY (DOUBLE ACTING) AIR SUPPLY (AIR TO OPEN) AIR SUPPLY (AIR TO CLOSE) L t H1 H Rc-P(b) Rc-P(b) VALVE OPEN：（a）EXHAUST （b）SUPPLY VALVE CLOSE：（a）SUPPLY （b）EXHAUST VALVE OPEN：（b）SUPPLY VALVE CLOSE：（b）EXHAUST VALVE OPEN：（a）SUPPLY VALVE CLOSE：（a）EXHAUST Rc-P(a) Rc-P(a) AUTOMATIC For detailed specifications, see P.122 DIAPHRAGM VALVE TYPE14 TYPE――A14P　 CONNECTION / FLANGED――JIS, DIN, ANSI AUTOMATIC PRODUCT MODEL CODE LIST