065 PARTS LIST MANUAL 0 S 4 7 6 4 7 6 3 1 2 5 3b 1 2 5 3c 8 1. FEMALE THREAD X FEMALE THREAD 7. MALE THREAD X ELBOW 16 mm LUB. FREE LAB COCK BALL VALVE / LAB COCK . LIGHT-WEIGHT AND COMPACT PLASTIC VALVE WITH EXCELLENT CORROSION RESISTANCE, FLOW CHARACTERISTICS, DURABILITY AND FUNCTIONALITY . WIDE SELECTION FROM A PRODUCT LINE OF 16 TYPES . OCTAGON BODY ALLOWING FOR EASY PIPING WITH SPANNER . FLOW CONTROL IS AVAILABLE. BASIC SPECIFICATIONS VALVE TYPE―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――LAB COCK BODY MATERIAL―――――――――――――――――――――――――――――――――――――――――――― U-PVC SEAL MATERIAL / SEAT―――――――――――― PTFE EPDM etc. 　　　　　 O-RING――――――――――――― EPDM FKM etc. HIGH PURITY SERIES―――――――――――――――――――――LUBRICANT FREE FLUID TEMPERATURE MAXIMUM WORKING PRESSURE (NORMAL TEMPERATURE) MPa{kgf/cm2} CONNECTION METHOD U-PVC 0℃ 〜 50℃ 1.0｛10.2｝ Hose type, Male thread type, Female thread type　 (Any combination is available.) NOTE (1) Degreased type is also available by made-to-order. (2) The maximum working pressure is the value including the water hammer pressure. Be careful that the maximum working pressure is not exceeded during use. * Concerning the allowable pressure for each temperature and material, see the technical documents at the end of this catalog. * For degreased type, PTFE only. * Standard products are degreased. PART NO. / NAME QTY MATERIAL 1 BODY 1 U-PVC 2 BALL STEM 1 U-PVC 3 END CONNECTOR 2 U-PVC 4 STEM HOLDER 1 U-PVC 5 SEAT* 2 EPDM, PTFE, etc. 6 O-RING 1 EPDM, etc. 7 HANDLE 1 ABS PART NO. / NAME QTY MATERIAL 1 BODY 1 U-PVC 2 BALL STEM 1 U-PVC 3b END CONNECTOR 1 U-PVC 3c END CONNECTOR 1 U-PVC 4 STEM HOLDER 1 U-PVC 5 SEAT 2 PTFE 6 O-RING 1 EPDM, etc. 7 HANDLE 1 ABS 8 ELBOW 1 U-PVC MANUAL V ACTUATION LC TYPE LV OPERATING SYSTEM U BODY MATERIAL ＊ SEAL MATERIAL STANDARD ＊ CONNECTION ＊＊＊＊ E EPDM V FKM 1 PTFE/EPDM SEE CONNECTION P.66. V MANUAL VALVE LC LAB COCK LV LEVER TYPE U U-PVC MANUAL PRODUCT MODEL CODE LIST J JIS D DIN A ANSI 1 HIGH PURITY SERIES 1 LUBRICANT FREE